2007 Jaguar X-type

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

offside sill corroded

Nearside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside drive shaft seal has slight leak

Offside Rear Inner Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D-bushes (5.3.4 (a) (i))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Nearside Rear Direction indicators incorrect colour (1.4.A.2f)

Offside Rear Direction indicators incorrect colour (1.4.A.2f)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Shock absorber has a slightly worn bush (2.7.4)

Offside Rear Shock absorber has an excessively worn bush (2.7.4)

Near side rear brake pads low

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components