2008 Toyota Aygo

Underbody covered all over in underseal

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm 1556514 (5.2.3 (e)) DANGEROUS

Front Exhaust mounting defective (6.1.2 (a))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Windscreen washer provides insufficient washer liquid empty (3.5 (a))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Exhaust mounting defective bracket corroded (6.1.2 (a))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bush splitting (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Lower Suspension arm pin or bush excessively worn wishbone rear bush (5.3.4 (a) (i))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bush splitting (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Lower Brake pipe corroded, covered in grease or other material inner (1.1.11 (c))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Lower Brake pipe corroded, covered in grease or other material inner (1.1.11 (c))

Nearside Front Outer Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Lower bottom ball joint dust cover slight damage but preventing ingress of dirt

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Windscreen wiper blade defective (3.4 (b) (i))

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Indicator switch faulty (1.4.A.1)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Tyre worn close to the legal limit 2.5mm (4.1.E.1)

Nearside wing mirror loose but not insecure

Offside Rear Tyre worn close to the legal limit 2mm (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

radiator surport crossmember damaged offside

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

radiator surport crossmember damaged offside

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)