2008 Volkswagen Caddy

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

slight play in both front inner steering arm joints

Nearside Front Child Seat fitted not allowing full inspection of adult belt ()

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Headlamp aim too low both sides (4.1.2 (a))

Nearside Front Child Seat fitted not allowing full inspection of adult belt ()

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner Rear Bush. (5.3.4 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner Rear Bush. (5.3.4 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Engine management light on

Front tyres worn to 3 mm. Legal limit 1.6 mm

O/s outer cv gaiter sweeping slightly

Rear silencer outer wrapping corroded, but not leaking

Secondary bonnet catch seized up and bonnet pull cable broken

Various body damage

All the tyre pressures were inflated prior to the test

Both front suspension strut top mounting bearings are dry

Both front suspension track control arm inner/rear bushes are slit/perished but secure

Both indicator repeater lenses are moist

The bonnet lock release handle is broken but the bonnet can still be opened

The exhaust rear silencer outer skin is corroded but it is not leaking

The n/s/r and spare tyres are a lower load rating than the others

The rear brake pads are low and the o/s/r parking brake lever on the caliper is not returning fully off but not binding

The rear registration plate was secured into its holder prior to the test

There is various slight bodywork damage

There is various slight underbody and component corrosion

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

All the tyre pressures were inflated prior to the test

Both front suspension strut top mounting bearings are dry

Both front suspension track control arm inner/rear bushes are slit/perished but secure

Both indicator repeater lenses are moist

The bonnet lock release handle is broken but the bonnet can still be opened

The exhaust rear silencer outer skin is corroded but it is not leaking

The n/s/r and spare tyres are a lower load rating than the others

The rear brake pads are low and the o/s/r parking brake lever on the caliper is not returning fully off but not binding

The rear registration plate was secured into its holder prior to the test

There is various slight bodywork damage

There is various slight underbody and component corrosion

Body work covered in swarf resulting in spots ofcorrosion

Bonnet pull cable and handle not working,trim insecure

N/s outer cv gaiter seeping at the drive shaft housing

N/s/r tyre not an extra load rated

Various small stone chips and light scratches in the windscreen

Centre Stop lamp not working (1.2.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Body work covered in swarf resulting in spots ofcorrosion

Bonnet pull cable and handle not working,trim insecure

N/s outer cv gaiter seeping at the drive shaft housing

Various small stone chips and light scratches in the windscreen

Offside Registration plate lamp not working (1.1.C.1d)

engine management light on!

front tyres worn to 2 mm, rear tyres worn to 3 mm. Legal limit 1.6 mm!

o/s interior piler trim missing.

outer rape of the rear exhaust silencer corroded, but not leaking.

rear axle bump stops damaged.

various small stone chips in the windscreen.

engine management light on!

front tyres worn to 2 mm, rear tyres worn to 3 mm. Legal limit 1.6 mm!

o/s interior piler trim missing.

outer rape of the rear exhaust silencer corroded, but not leaking.

rear axle bump stops damaged.

various small stone chips in the windscreen.

exhaust stystem corroded but not leaking.

Bonnet retaining device ineffective (8.4.2)

Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

exhaust stystem corroded but not leaking.

the front tyre tread depths are 3mm (min limit is 1.6mm) the n/s/r is 4mm, the o/s/r is 5mm and the spare is unused

the o/s door electric window switch assembly is missing

the rear brake pads are low and the o/s parking brake lever is not returning to its fully off stop but there is no binding

there are slight dents in both front wings and the n/s/r door

the rear brake discs are slightly corroded and the pads are half worn

there are small stonechips in the windscreen

front tyres worn to 4 mm. Legal limit 1.6 mm.

rear brake pads 1/2 worn.

various small stone chips in windscreen.