2014 Lexmoto Zsx

Gear lever linkage slight play.

Steering head bearings are slightly stiff.

front brake hose is routed incorrectly but is safe at point of test.

Drive chain excessively tight (6.1.7 (k) (i))

Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Gear lever linkage slight play.

Front Upper Exhaust has a minor leak of exhaust gases Leak from header pipe (6.1.2 (a))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Exhaust noisy (8.1.1 (a))

Nearside Front Direction indicator with a multiple light source more than 1/2 not functioning Over half legs not working (4.4.1 (a) (ii))

Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Registration plate does not conform to the specified requirements Broken (0.1 (d))

Rear Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Rear Stop lamp switch with a delay in operation Braking before light comes on (4.3.2 (a) (ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Drive chain so loose it is likely to fail Can remove chain from sproket (6.1.7 (c) (ii)) DANGEROUS

Front Upper Exhaust has a minor leak of exhaust gases Leak from header pipe (6.1.2 (a))

Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Exhaust noisy (8.1.1 (a))

Rear Registration plate lamp insecure Braket loose (4.7.1 (c) (i))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Lower Side stand has free play

Rear Exhaust noisy (8.1.1 (a))

Rear Lower Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Lower Side stand has free play

Rear Exhaust noisy (8.1.1 (a))

Rear Lower Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Rear reflector missing (4.8.2 (a) (ii))

Central Front Side stand pivot worn

Front Exhaust header light rusting

Nearside Front Gear lever pivot worn

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Suspension arm corroded but not seriously weakened Light rusting (5.3.3 (b) (i))

Wheel alignment slightly misaligned (2.4 (a))

Central Front Side stand pivot worn

Front Exhaust header light rusting

Nearside Front Gear lever pivot worn

Rear Brake back plate insecure Tie arm locking pin missing (1.1.14 (d))

Rear Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Rear Suspension arm corroded but not seriously weakened Light rusting (5.3.3 (b) (i))

Wheel alignment slightly misaligned (2.4 (a))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Stop lamp remains on when the brake is released (1.3.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking engine to frame mount are loose witch causes the engine to move in frame (6.1.1c) DANGEROUS

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) DANGEROUS

Steering movement excessively 'notchy' with the wheel raised (2.2.1b) DANGEROUS

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a) DANGEROUS

Front Brake pad(s) close to minimum limit (3.2.A1f(i))