2011 Mazda MPV

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Driver's view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Upper Anti-roll bar linkage ball joint dust cover missing (5.3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Brake disc worn, pitted or scored, but not seriously weakened all (1.1.14 (a) (ii))

o/s &n/s/r rear arch inner panels corroded not effecting structure

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Brake pedal has insufficient reserve travel (1.1.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear fog lamp missing (4.5.1 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))

Both rear arches corroded

Both rear chassis legs corroded

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floorpan (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floorpan (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innersill (5.3.6 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Headlamp reflector slightly defective (4.1.1 (b) (i))

Nearside Front Inner Sill corroded just outside Prescribed area

Nearside Rear Inner Suspension component mounting repair covered in underseal Arch (5.3.6 (a) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Inner Sill corroded just outside Prescribed area

Offside Rear Inner Suspension component mounting repair covered in underseal Arch (5.3.6 (a) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Headlamp levelling device inoperative (4.1.5 (a))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Inner Sill corroded just outside Prescribed area

Nearside Front Headlamp reflector slightly defective (4.1.1 (b) (i))

Nearside Front Inner Sill corroded just outside Prescribed area

Nearside Rear Inner Suspension component mounting repair covered in underseal Arch (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting repair covered in underseal Arch (5.3.6 (a) (i))

Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))

Offside Body component damaged and likely to cause injury mirror (6.2.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))

Nearside Front inner sill corroded

Offside Front inner sill corroded

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Emissions not tested (8.2.1.2 (d))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Tyre worn close to the legal limit both rear (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Stop lamp not working (1.2.1b)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)