2002 Aprilia RX50

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Position lamp not working (4.2.1 (a))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Rear Position lamp not working (4.2.1 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Wheel spoke slightly loose. (4.2.1b)

Front Headlamp deteriorated but function not impaired (1.2.3a)

Rear Rear shock absorber has a light misting (2.4.A.1c)

Rear Wheel spoke slightly loose. (4.2.1b)

rear sprocket bolt missing

Front Brake lining(s) contaminated by oil or grease (3.2.A1k)

Front Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Front Front mudguard can easily contact any fixed point of the motor bicycle. (2.3.7)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Steering movement excessively stiff with the wheel raised (2.2.1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Front Headlamp deteriorated but function not impaired (1.2.3a)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Drive chain slightly tight (6.2.1d)

Rear Rear shock absorber has a light misting (2.4.A.1c)

Rear Wheel alignment slightly misaligned. (2.5.1)

Rear Wheel spoke slightly loose. (4.2.1b)

rear sprocket bolt sheared off and missing

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp dipped beam affected by the operation of another lamp (1.2.2c)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Front Front shock absorber seal failed and leaking oil (2.3.3)

Front Front wheel spindle securing nut locking device insecure (2.3.3a)

Front Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Direction indicator flashing more than 120 times per minute (1.5.1c)

Rear Registration plate margin less than the minimum requirement (6.3.4g)

Rear Registration plate not displaying a BSAU 145d marking (6.3.3b)

Rear Registration plate not displaying the name of the supplying outlet (6.3.3a)

Rear Registration plate not displaying the postcode of the supplying outlet (6.3.3a)

Rear Wheel spoke excessively loose (4.2.1b)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Wheel spoke slightly bent. (4.2.1b)

Offside Front Brake lever is so short and the brake cannot be readily applied (3.1.3c)

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Headlamp aim too low when the centre of the headlamp is below 850mm from the ground (1.6.2)

Nearside Front Direction indicator flashing less than 60 times a minute (1.5.1c)

Offside Front Direction indicator flashing less than 60 times a minute (1.5.1c)

Offside Rear Direction indicator flashing less than 60 times a minute (1.5.1c)

Rear Direction indicator flashing less than 60 times a minute (1.5.1c)

Rear Wheel spoke missing (4.2.1b)