2003 Seat Alhambra

Body has slight corrosion (6.1.B.2)

Engine covers/Under trays fitted

Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

coil spring corroded both rear (2.4.C.1b)

nearside front and offside front sill distorted

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Inner Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength sill 2 places (2.4.A.3)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Inner Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Offside Rear Inner Subframe mounting prescribed area is excessively corroded sill 2 places (2.4.A.3)

Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Steering rack gaiter split (2.2.D.2d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

coil spring corroded both rear (2.4.C.1b)

nearside front and offside front sill distorted

Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

rear exhaust deteriated

Nearside Rear Anti-roll bar missing (2.4.G.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Stop lamp not working (1.2.1b)

Offside Front Direction indicators not working (1.4.A.2c)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

rear exhaust deteriated

Engine covers fitted obscuring some components in the engine bay

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

Nearside Front Steering rack gaiter split (2.2.D.2d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Stop lamp not working (1.2.1b)

Engine covers fitted obscuring some components in the engine bay

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Front Suspension arm has slight play in a pin/bush (2.4.G.2)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

Oil leak

Under-trays fitted obscuring some underside components

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Shock absorber casing corroded externally so the unit does not function (2.7.2a)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Oil leak

Under-trays fitted obscuring some underside components

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

front brake disc's poor

n/s/r tyre close to limit on inner edge

o/s and n/s rear outer antiroll bar bushes worn

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim too high (1.8)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Rear registration plate deteriorated (6.3.1d)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

ENGINE TIMIMG BELT WILL NEED REPLACING IN 3000 MILES

Front Brake pad(s) wearing thin (3.5.1g)

n/s seat belt inertia reel mecanism sticking