2003 Ford Ranger

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Front Brake pipe corroded, covered in grease or other material both sides behind wing (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive front leaf mount (5.3.6 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced behind bumper (6.1.1 (c) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Suspension arm pin or bush worn but not resulting in excessive movement all (5.3.4 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced various (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Brake load sensing valve stiff (1.1.17 (c) (ii))

Front Brake pipe corroded, covered in grease or other material both sides behind wing (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive front leaf mount (5.3.6 (a) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced behind bumper (6.1.1 (c) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Suspension arm pin or bush worn but not resulting in excessive movement all (5.3.4 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced various (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Steering linkage ball joint has slight play intermediate drop arm (2.1.3 (b) (i))

Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security body mounting (6.2.2 (d) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Steering linkage ball joint has slight play intermediate drop arm (2.1.3 (b) (i))

Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Exhaust mounting defective (6.1.2 (a))

Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security body mounting (6.2.2 (d) (i))

Offside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake load sensing valve stiff (3.6.E.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

corrosion in all underside of vehicle structure/suspension/brake components.

Offside Rear Rear position lamp(s) incorrect colour (1.1.A.3e)