2004 Honda CG125

Drive chain slightly tight (6.1.7 (k) (i))

daylight use only mot lights tpped

Horn not working (7.7 (a))

Drive chain slightly tight (6.1.7 (k) (i))

daylight use only mot lights tpped

Front suspension reacking noise

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

daylight use only mot all lights taped

suspension stiff

Headlamp light intensity reduced pattern deteriated (4.1.4 (a))

no indicators fitted

no rear footrests fitted at tiome of test

rear shockabsorber bushes perished

rear suspension stiff

Front Wheel bearing has slight play (5.1.3 (a) (i))

day light only mot all lights taped over

front brake noisey

no rear foot rest fitted

rear suspension stiff

All direction indicators missing (4.4.1 (a) (ii))

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Front Brake caliper inadequately mounted missing (1.1.16 (c) (i))

Front Brake master cylinder reservoir cap missing (1.1.10 (e))

Headlamp reflector seriously defective (4.1.1 (b) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake disc missing (1.1.14 (c)) DANGEROUS

no rear foot rest fitted

Front Exhaust slightly deteriorated (7.1.1a)

Rear Tyre worn close to the legal limit on limit (4.1.3(ii))

front brake slightly spongy

front tyre and brake caliper coated with tar

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front suspension assembly slightly corroded. (2.3.1)

Long travel on front lever

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Front suspension assembly slightly corroded. (2.3.1)

Offside Rear suspension component slightly corroded. (2.4.A.1a)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Drive chain slightly loose (6.2.1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

front tyre soft

rear tyre soft

Steering movement slightly 'notchy' (2.2.1b)

Rear Drive chain sprocket slightly worn (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Drive chain sprocket slightly worn (6.2.1e)

Steering movement slightly 'notchy' (2.2.1b)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))