2005 Iveco Daily

Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced front to rear (6.1.1 (c) (i))

Nearside Rear Brake load sensing valve linkage defective but function not impaired (1.1.17 (a))

Nearside Rear Brake load sensing valve stiff (1.1.17 (c) (i))

Offside Integral body structure is corroded but structural rigidity is not significantly reduced generally front to rear (6.1.1 (c) (i))

Offside Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity (4.2.3 (b) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Parking brake lever defective but can be satisfactorily operated Has little reserve travel (1.1.6 (d))

Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Central rear diff cover corroded and slight leaking of oil

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Central Rear Brake load sensing valve linkage defective and function impaired missing linkage (1.1.17 (a))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Front Lower Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear sill by outrigger (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear sill (5.3.6 (a) (i))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Offside Front Brake master cylinder/servo mounting prescribed area is excessively damaged and functionality of the braking system is affected bulkhead corroded (1.1.21 (e) (ii)) DANGEROUS

Central rear diff cover corroded and slight leaking of oil

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Upper Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Obligatory mirror slightly loose repaired by duct tape (3.3 (b) (i))

Nearside Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced prescribed area within 30cm of mounting (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Inner Body component slightly loose wheel arch sill corroded (6.2.1 (a) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flitch (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor panel (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor panel (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor panel (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flitch (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor panel (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre member (5.3.6 (a) (i))

Fluid leak, but not excessive fuel pump (8.4.1 (a) (i))

Offside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings NEAR PEDALS MOUNTINGS (6.1.B.2)

Offside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings STEERING MOUNTING BOLTS (6.1.B.2)

Offside Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)

Offside Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Horn not working (1.6.2a)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Stop lamp not working (1.2.1b)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Offside Front Outer Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear fog lamp not working (1.3.2b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Nearside Front uneven wear on tyre

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

n/s & o/s body sills very ruty

o/s front tyre getting low

rear outriggers very rusty

Brake master cylinder/servo mounting prescribed area is excessively corroded bulk head (3.6.C.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Registration plate lamp not working (1.1.C.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

n/s & o/s body sills very ruty

o/s front tyre getting low

rear outriggers very rusty

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

marks on n/s windscreen

Brake fluid warning lamp illuminated (3.6.G.2)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear brake caliper has restricted free movement (3.5.1k)

Offside Rear fog lamp not working (1.3.2b)

Parking brake: efficiency below requirements (3.7.B.7)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

brake pad wires broken

marks on n/s windscreen

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

o/s rear lamp damaged

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear brake caliper has restricted free movement (3.5.1k)

Parking brake: efficiency below requirements (3.7.B.7)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

o/s rear lamp damaged

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

battrey loose

brake light on dash pad wires broken

n/s front tyre worn on outside

Front Brake pipe inadequately clipped (3.6.B.1)

Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)

Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)

Offside Rear fog lamp not working (1.3.2b)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

battrey loose

brake light on dash pad wires broken

n/s front tyre worn on outside

front pads getting low

o/s/r tyer getting low

pad ligth on dash

rear lamp damaged

Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear rear brake binding (3.7.B.1)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

nearside mirror lose

Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)