2006 Fiat Camper

Exhaust mounting defective centre (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front cross member area corroded

Offside Front outer and inner sill corroded

centre exhaust box slightly deteriorated

Brake load sensing valve stiff (1.1.17 (c) (ii))

Central Exhaust mounting defective (6.1.2 (a))

Offside Front Outer sill area corroded

Offside Front cross member area corroded

center exhaust box slightly deteriorated

Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength X2 areas (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point area (5.3.6 (a) (i))

Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength X2 areas (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Brake load sensing valve stiff (1.1.17 (c) (ii))

Central Exhaust mounting defective (6.1.2 (a))

Offside Front Outer sill area corroded

Offside Front cross member area corroded

center exhaust box slightly deteriorated

Central Exhaust mounting defective (6.1.2 (a))

Nearside Front outer sill corroded

Nearside Rear Tyre slightly damaged/cracking or perishing also worn inner edge (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing also worn inner edge (5.2.3 (d) (ii))

Horn not working (7.7 (a))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Rear mount (5.3.6 (a) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength front mount (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength excessive corrosion within 30cm of shock absorber mounting (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength excessive corrosion within 30cm of strut mounting (5.3.6 (a) (i))

Exhaust mounting defective (6.1.2 (a))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge worn low on inner edge (5.2.3 (e))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge worn low on inner edge (5.2.3 (e))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge and perishing (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge and perishing. (5.2.3 (e))

Nearside Front Direction indicator incorrect colour (4.4.3 (a))

Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill. (7.1.1 (a) (i))

Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced X3 (6.1.1 (c) (i))

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Offside Front Service brake excessively fluctuating (1.2.1 (e))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Exhaust mounting defective (6.1.2 (a))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Rear Tyre worn close to legal limit/worn on edge and perishing (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge and perishing. (5.2.3 (e))

Front Coil spring corroded n/s and o/s (5.3.1 (b) (i))

Front Sub-frame corroded but not seriously weakened crossmember (5.3.3 (b) (i))

Front Tyre slightly damaged/cracking or perishing perishing on sidewalls (5.2.3 (d) (ii))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced jacking point (6.1.1 (c) (i))

Power steering pipe/hose slightly corroded covered in grease (2.1.5 (g) (i))

Rear corrosion on suspension components

exhaust system corroded

surface corrosion on front subframe and suspension components

Nearside Front front brake fluctuating, but not excessively (3.7.B.3)

Offside Front front brake fluctuating, but not excessively (3.7.B.3)

exhaust silencer slightly deteriorated

o/s/f + n/s/f brake discs corroded

Horn not working (1.6.2a)

Parking brake lever is impeded in its travel (3.1.6c)

Nearside Front front brake fluctuating, but not excessively (3.7.B.3)

Offside Front front brake fluctuating, but not excessively (3.7.B.3)

exhaust silencer slightly deteriorated

o/s/f + n/s/f brake discs corroded

beam benders on headlights

power steering pipes rusty

Nearside Registration plate lamp not working (1.1.C.1d)

beam benders on headlights

power steering pipes rusty