MOT Status
ExpiredMileage
167,710 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Body component damaged and likely to cause injury Mirror damaged (6.2.1 (a) (i))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Lower Suspension arm pin or bush excessively worn Spring carrying arm outer bush (5.3.4 (a) (i))
Nearside Rear Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Side repeater not working (4.4.1 (a) (ii))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Trailing arm bush mounting area (5.3.6 (a) (i))
Offside Rear Lower Suspension arm pin or bush excessively worn Spring carrying arm outer bush (5.3.4 (a) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive Shock mounting area (5.3.6 (a) (i))
Offside Front Shock absorbers has a reduced damping effect (5.3.2 (d))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive Shock mounting area (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Outer bush (5.3.4 (a) (i))
Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Outer bush (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Rear Position lamp with a multiple light source more than 1/2 not functioning (4.2.1 (a) (ii))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Outer bush (5.3.4 (a) (i))
Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Lower Suspension arm pin or bush worn but not resulting in excessive movement Outer bush (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge on edges (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge on edges (5.2.3 (e))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Hydraulic fluid leaking excessively (8.4.1 (a) (i))
Offside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Nearside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Trailing arm rubber bush deteriorated resulting in excessive movement Off side and near side (2.4.G.2)
Rear Exhaust heat shields not very secure
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement Off side and near side (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
rear exhaust corroded
Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)
rear exhaust box rusted
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
off side and near side front brake discs worn
off side and near side rear brake discs worn
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford S-max?
Based on 1,368,227 MOT tests across 101,843 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WJ56 LHW is a 2006 Ford S-max in Blue with a 1,753cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 72.7%.
Across all 2006 Ford S-max models, the average MOT pass rate is 70.6% with a typical mileage of 91,240 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford S-max fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 26,089 recorded failures. If you're considering buying WJ56 LHW, it's worth having these areas checked by a mechanic before committing.
The Ford S-max typically stays on UK roads for around 20 years. At 20 years old, this Ford S-max is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WJ56 LHW?
You can check the full history of WJ56 LHW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WJ56 LHW registered?
WJ56 LHW is a 2006 Ford S-max, first registered on 14 September 2006.
Is WJ56 LHW safe to buy?
The MOT history for WJ56 LHW shows 22 tests with a 72.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WJ56 LHW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WJ56 LHW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.