2008 Yamaha Ybr 125 Custom

Chain guard missing ()

Exhaust noisy (8.1.1 (a))

Drive chain worn but not considered excessive borderline (6.2.1e)

Front Brake component is slightly corroded brake pads (3.1.5)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Exhaust slightly deteriorated (7.1.1a)

Front wheel bearings are slightly rough (2.3.5b)

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Drive chain excessively loose (6.2.1d)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride foot rest pin (6.2.1h)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Throttle operating incorrectly (6.2.1f)

Drive chain worn but not considered excessive borderline (6.2.1e)

Front Brake component is slightly corroded brake pads (3.1.5)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Exhaust slightly deteriorated (7.1.1a)

Front wheel bearings are slightly rough (2.3.5b)

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Rear Drive chain sprocket slightly worn (6.2.1e)

Steering movement slightly 'notchy' (2.2.1b)

Rear wheel bearings have slight free play (2.4.A.2c)

Steering movement slightly 'notchy' (2.2.1b)

Drive chain worn to excess (6.2.1e)

Rear Drive chain sprocket worn to excess (6.2.1e)

Throttle operating incorrectly (6.2.1f)

Rear wheel bearings have slight free play (2.4.A.2c)

Steering movement slightly 'notchy' (2.2.1b)

Exhaust rusty not yet blowing.

chain tension ?

Chain guard insecure (6.2.1c)

Drive chain sprocket carrier worn to excess (6.2.1e)

Drive chain worn to excess (6.2.1e)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear suspension bush has excessive free play (2.4.A2a(i))

Chain guard lightly rubbing (6.2.1c)

Exhaust rusty not yet blowing.

Rear Drive chain sprocket slightly worn (6.2.1e)

Front Headlamp aim too high and too far to the left. (1.6)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))