2008 Kia Picanto

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting holed next to mounting points (6.2.2 (d) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Service brake binding but not excessively both front (1.2.1 (f))

front and rear suspension components corroded

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Outer Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases middle to rear clamp leaking (6.1.2 (a))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases middle to rear clamp leaking (6.1.2 (a))

Rear Nail in tyre both ()

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting area (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Suspension component corroded but not seriously weakened rear axle (5.3.3 (b) (i))

Brake performance not tested (1.2.1 (g))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting area (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle mounting area (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Suspension component corroded but not seriously weakened rear axle (5.3.3 (b) (i))

Nearside Rear Brake pipe excessively corroded by fule tank (1.1.11 (c))

Central Exhaust mounting defective (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Central Exhaust mounting defective (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Rear Upper Stop lamp not working (1.2.1b)

Nearside Brake pipe excessively corroded front to rear (3.6.B.2c)

Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Registration plate lamp not working (1.1.C.1d)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear tyre worn on edges

high level brake light inop.

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

high level brake light not working

Centre Exhaust system not adequately supported (7.1.1)

Front Exhaust system not adequately supported (7.1.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

n/s/f brake disc scored, brakes grinding