2009 Land Rover Discovery

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Headlamp aim too high (4.1.2 (a))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Suspension bellows damaged but not to excess (5.3.5 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Suspension bellows damaged but not to excess (5.3.5 (b) (i))

Offside Rear Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Rear Brake pipe corroded, covered in grease or other material all (1.1.11 (c))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge Outer edge (5.2.3 (e))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Nearside Bonnet primary retaining device ineffective (3.1 (c))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Front Tyre worn close to legal limit/worn on edge o/s and n/s (5.2.3 (e))

Exhaust emits an excessive level of metered smoke (7.4.B.3a)

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Headlamp aim too high (1.8)

Nearside Side repeater incorrect colour (1.4.A.2f)

Front Brake pad(s) wearing thin (3.5.1g)

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Lower Front suspension has excessive movement at a wishbone pin or bush rear (2.5.A.1c)

Offside Front Lower Front suspension has excessive movement at a wishbone pin or bush rear (2.5.A.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)