2017 Sinnis Rsx 125

Drive chain excessively loose (6.1.7 (c) (i))

Front Brake excessively binding (1.2.1 (f))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake excessively binding (1.2.1 (f))

Registration plate does not conform to the specified requirements (0.1 (d))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake excessively binding (1.2.1 (f))

Horn not working (7.7 (a))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Registration plate does not conform to the specified requirements Broken & faded (0.1 (d))

Suspension arm pin or bush excessively worn Swingarm pivot (5.3.4 (a) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain excessively tight (6.1.7 (k) (i))

Rear Brake disc contaminated (1.1.14 (b))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Early signs of rear brake bind.

Slight contact of rear brake pedal on exhaust,efficiency not affected.

Drive chain worn to excess (6.1.7 (c) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Shock absorber has negligible damping effect (5.3.2 (b))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Slight contact of rear brake pedal on exhaust,efficiency not affected.

Front Tyre worn close to the legal limit (5.2.3 (e))

Reduced damping evident on rear shock.

Drive chain excessively loose (6.1.7 (c) (i))

Rear Shock absorber has negligible damping effect (5.3.2 (b))

Rear Suspension arm pin or bush excessively worn Swinging arm. (5.3.4 (a) (i))

Rear Tyre incorrectly seated on the wheel rim Puntured. (5.2.3 (k))

Rear reflector missing (4.8.2 (a) (ii))

Front Tyre worn close to the legal limit (5.2.3 (e))

Sligtly reduced damping rear suspension.

Very early signs of front brake bind.

Headlamp aim too low (4.1.2 (a))

Sligtly reduced damping rear suspension.

Very early signs of front brake bind.