2017 Lexmoto Hawk 125 Xgj 125-28

Exhaust noisy (8.1.1 (a))

Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Upper Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened Swing arm (5.3.3 (b) (i))

Rear Upper Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Front Brake hose slightly twisted Fouling fairing/instruments (1.1.12 (b) (i))

Front Upper Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Motorcycle structure is corroded but structural rigidity is not significantly reduced Swing arm (6.1.1 (c) (i))

Rear Tyre worn close to the legal limit Measures 1.0mm (5.2.3 (e))

Rear Upper Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Front Brake indicates excessive fluctuation of brake effort Lever also "pulsing" (1.2.1 (e))

Front Shock absorber has negligible damping effect (5.3.2 (b))

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam Both (4.1.1 (a) (ii))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Position lamp not working (4.2.1 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Stop lamp not working Rear control - flickers on/off (4.3.1 (a) (ii))

Wheel alignment incorrect which adversely affects the handling (2.4 (a))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Drive chain sprocket slightly loose Cush drive rubbers worn (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake hose slightly damaged Rear to front link hose not secured near exhaust area (1.1.12 (b) (i))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Tyre worn close to the legal limit Measures 1.6mm (5.2.3 (e))

Nearside Rear Passenger foot rest assembly missing

Rear Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Upper Motorcycle structure is corroded but structural rigidity is not significantly reduced Subframe (6.1.1 (c) (i))