2002 Suzuki Carry

Rear Registration plate inscription illegible (0.1 (b))

Windscreen washer not working (3.5 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Spare tyre defective ()

Central Exhaust mounting defective (6.1.2 (a))

Central Upper Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component mounting prescribed area is corroded but not considered excessive all (5.3.6 (a) (i))

Central Exhaust mounting defective (6.1.2 (a))

Central Upper Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Suspension component mounting prescribed area is corroded but not considered excessive all (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Central Upper Stop lamp has light sources not illuminating, but not more than 50% (1.2.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Front Suspension component mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Track rod end ball joint has slight play (2.2.B.1f)

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (2.4.A.3)

Front Suspension spring mounting prescribed area is corroded but not considered excessive Both (2.4.A.3)

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive Both (2.4.A.3)

Steering system slightly rough (2.2.D.1)

Front Suspension spring mounting prescribed area is corroded but not considered excessive Both (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both sides (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive Both (2.4.A.3)

Steering system slightly rough (2.2.D.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front Macpherson strut has slight movement at the upper attachment Both (2.5.A.1c)

Front Suspension spring mounting prescribed area is corroded but not considered excessive Both sides (2.4.A.3)

Offside Side repeater deteriorated, but still visible from a reasonable distance (1.4.A.2e)

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Chassis areas (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive Both sides (2.4.A.3)

Steering system slightly rough (2.2.D.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front Macpherson strut has slight movement at the upper attachment Both (2.5.A.1c)

Front Suspension spring mounting prescribed area is corroded but not considered excessive Both sides (2.4.A.3)

Offside Side repeater deteriorated, but still visible from a reasonable distance (1.4.A.2e)

Offside Side repeater not working (1.4.A.2c)

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive Chassis areas (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive Both sides (2.4.A.3)

Steering system slightly rough (2.2.D.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear wheel bearing has slight play (2.6.2)

Offside Side repeater incorrect colour (1.4.A.2f)

Offside Stop lamp not working (1.2.1b)

Play in steering rack inner joint(s)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear wheel bearing has slight play (2.6.2)

Play in steering rack inner joint(s)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Body has slight corrosion (6.1.B.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Upper Body has slight corrosion (6.1.B.2)

exhaust deterated not blowing at time of test

underside rusty not holed at time of test

Body has slight corrosion (6.1.B.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Body has slight corrosion (6.1.B.2)

Exhaust has part of the system slightly deteriorated (7.1.1a)