MOT Status
ValidMileage
172,969 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Play in steering rack inner joint(s)
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i))
Offside Play in steering rack inner joint(s)
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/ subframe mounting (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/ suspension mounting (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis/ subframe mounting (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/ suspension mounting (5.3.6 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor above brake pipe (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
All welding needed marked by chalk
Brake pipe corroded, covered in grease or other material Various (1.1.11 (c))
Play in steering rack inner joint(s)
Rear Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Fuel system component leaking (6.1.3 (b) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Lower Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Rear Both brake disc s corroded
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Lower Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive Engine (8.4.1 (a) (i))
Rear Both brake disc s corroded
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit on limit (4.1.E.1)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
o/s/r tyre wearing inner edge
rear back plates corroded
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer rigger (6.1.B.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings too rear inner sill section (6.1.B.2)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings too rear sill section holed and marked with chalk (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cross member (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings too rear marked with yellow chalk (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings too rear rear sill section marked yellow chalk (6.1.B.2)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner cross member (6.1.B.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre worn close to the legal limit on limit (4.1.E.1)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
o/s/r tyre wearing inner edge
rear back plates corroded
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill (5.2.6)
Nearside Front Suspension component mounting prescribed area is excessively corroded suspension turret. (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting mounting point close to towing eye. (6.6.6)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded inner and outer sill (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded on top of chassis rail aswell as on the side. (2.4.A.3)
Offside Rear Shock absorber has a serious fluid leak (2.7.3)
Nearside Front Inner Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside nearside front tyre getting low
corrosion in a number of places
excessive corrosion to offside outer sill outside of prescribed area
offside front brake pipe corroded
wiper clearing deteriorating
Nearside Front Subframe mounting prescribed area is excessively corroded chassis leg (2.4.A.3)
Offside Front Lower Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside nearside front tyre getting low
corrosion in a number of places
excessive corrosion to offside outer sill outside of prescribed area
offside front brake pipe corroded
wiper clearing deteriorating
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
corrosion in a number of places
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
corrosion in a number of places
Body has slight corrosion (6.1.B.2)
Parking brake lever has little reserve travel (3.1.6b)
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Wheel stud(s) missing (4.2.A.1e)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Nearside Inner Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Inner Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Nearside Stop lamp not working (1.2.1b)
Items removed from driver's view prior to test
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Side repeater slightly discoloured (1.4.A.2f)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Items removed from driver's view prior to test
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Side repeater slightly discoloured (1.4.A.2f)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
front discs worn
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Stop lamp not working (1.2.1b)
Offside Rear fog lamp not working (1.3.2b)
rear brake application uneven (3.7.B.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc slightly pitted (3.5.1h)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
both front flexi brake hoses perished and splitting - no cords visible.
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WK02 VWW is a 2002 Mercedes-benz Vito in Silver with a 2,151cc diesel engine. This vehicle has been through 37 MOT tests with a personal pass rate of 62.2%.
Across all 2002 Mercedes-benz Vito models, the average MOT pass rate is 65.4% with a typical mileage of 110,245 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying WK02 VWW, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 24 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WK02 VWW?
You can check the full history of WK02 VWW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WK02 VWW registered?
WK02 VWW is a 2002 Mercedes-benz Vito, first registered on 26 March 2002.
Is WK02 VWW safe to buy?
The MOT history for WK02 VWW shows 37 tests with a 62.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WK02 VWW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WK02 VWW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.