2002 Yamaha XT600

Front Wheel corroded but not to excess (5.2.2 (c) (i))

Front Wheel corroded but not to excess (5.2.2 (c) (i))

Front front tyre perished

Rear rear tyre perished

Front Wheel corroded but not to excess (5.2.2 (c) (i))

rear tyre perished

Front Wheel corroded but not to excess (5.2.2 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Wheel corroded but not to excess (5.2.2 (c) (i))

Rear rear tyre perished on side wall

Front Wheel corroded but not to excess (5.2.2 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

oil leak from frame

Brake pedal pivots slightly worn (3.1.3a)

Motorcycle structure slightly corroded (6.1.1a)

Oil leak ()

Brake pedal pivots slightly worn (3.1.3a)

Front Motorcycle structure slightly corroded (6.1.1a)

Oil leak ()

Clutch lever bent (6.2.1g)

oil leak from front of frame

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Motorcycle structure slightly corroded (6.1.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear suspension bush has slight free play (2.4.A2a(i))

fork gaitors ripped

Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rear Tyre worn close to the legal limit (4.1.3(ii))

front brake binding slightly

rear n/plate deterating

front brake binding slightly

front gaiters split

Front Roller brake test indicates a binding brake (3.3.A1a)

Lower Rear mono-shock pivot worn but not excessive (2.4.B.4)

Front Brake lever has inadequate reserve travel (3.1.3b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Headlamp aim too low (1.6)

Lower Rear suspension bearing has slight free play (2.4.A2a(i))

Wheel alignment slightly misaligned. (2.5.1)

Front Brake fluid reservoir fluid level low (3.2.B1d)

front brake binding slightly

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Headlamp deteriorated but function not impaired (1.2.3a)

Front Roller brake test indicates a binding brake (3.3.A1a)