2002 Toyota Land Cruiser

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced General Chassis (6.1.1 (c) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced General Chassis (6.1.1 (c) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Fuel Pipe/s corroded fuel filler tubes ()

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair park brake lower effort (1.2.1 (c))

Rear Suspension component corroded but not seriously weakened axle (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Rear Suspension component mounting repair covered in underseal chassis (5.3.6 (a) (i))

Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mount (5.3.6 (a) (i))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Fuel Pipe/s corroded fuel filler tubes ()

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair park brake lower effort (1.2.1 (c))

Rear Suspension component corroded but not seriously weakened axle (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Rear Suspension component mounting repair covered in underseal chassis (5.3.6 (a) (i))

Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Front brake disc backing plates corroded

Fuel tank filler pipes damp suspected to be leaking fuel

Fuel tank metal pipes on top excessively corroded

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicles suspension corroded

Front brake disc backing plates corroded

Fuel tank filler pipes damp suspected to be leaking fuel

Fuel tank metal pipes on top excessively corroded

Offside Front Direction indicator incorrect colour (4.4.3 (a))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicles suspension corroded

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis by brake valve (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body to chassis (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body to axle (5.3.6 (a) (i))

Nearside Front back plate corroded

Offside Front back plate corroded

Rear Brake pipe corroded, covered in grease or other material main (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material main (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Exhaust silencer insecure centre to rear joint corroded off (8.1.1 (b) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Centre / rear exhaust corroded on joint

Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sills (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

Rear chassis / towbar corroded

Rear chassis corroded

Brake valve corroded but not excessively weakened (3.6.A.2b)

Towbar component slightly corroded (6.6.1)

rear chassis corroded

rear inner sills corroded

Front Service brake grabbing slightly (3.7.C.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Towbar component slightly corroded (6.6.1)

unable to asses rear brake pads

rear chassis slightly corroded

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

rear chassis slightly corroded

surface corrosion to rear chassis / floorpans

Nearside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.C.1b) DANGEROUS

brake fliud low

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Offside Rear fog lamp not working (1.3.2b)

Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

Nearside Inner Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Inner Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Headlamp aim too high (hotspot upper edge above the horizontal 0% line) (1.6.D1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Windscreen wiper blade deteriorated (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Windscreen wiper blade deteriorated (8.2.2)