2003 Mercedes-benz Vito

Anti-lock braking system warning lamp does not illuminate (3.4.1b)

Electronic stability system warning lamp does not illuminate (3.4.1b)

A little brake judder

Corrosion in sills and side panels

Hazard light switch intermittently temperamental

Offside rear tyre worn to wear indicator bars and starting to crack in tread

Parking brake just met minimum requirements

Slight play nearside front roll bar link

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Electronic stability system warning lamp indicates a fault (3.4.1c)

Exhaust has a major leak of exhaust gases (7.1.2)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Side repeater not working (1.4.A.2c)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

A little judder on all brakes

Offside rear tyre worn to wear indicator bars and starting to crack in tread

Slight wear/play in nearside front roll bar end link

Exhaust has a minor leak of exhaust gases (7.1.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

both rear shock absoorber outer casings corroded.

engine managment light on

moderate play inm both rack/ends.

n/s/f tyre worn on inner and outer edges,also worn close to minimum limits.

underside and bodywork has heavy surface corroded.

Exhaust has a minor leak of exhaust gases (7.1.2)

Fuel cap/sealing device missing (7.2.4a)

Nearside Rear Obligatory mirror missing (8.1.1)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

both rear shock absoorber outer casings corroded.

engine managment light on

moderate play inm both rack/ends.

n/s/f tyre worn on inner and outer edges,also worn close to minimum limits.

underside and bodywork has heavy surface corroded.

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Registration plate lamp not working (1.1.C.1d)

both rear light lenses cracked ,but not emitting any white light.

moderate amount of surface corrosion on underside of vehicle.

rear shock absorber outer casings corroded.

both rear light lenses cracked ,but not emitting any white light.

moderate amount of surface corrosion on underside of vehicle.

rear shock absorber outer casings corroded.

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Registration plate lamp not working (1.1.C.1d)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Offside Rear rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

front discs pitted

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

handbrake travel high

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc cracked (3.5.1h)

Offside Front brake disc cracked (3.5.1h)

Registration plate lamp not working (1.1.5c)