2003 Ford Ranger

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Brake pipe slightly corroded (3.6.B.2c)

Front Body has slight corrosion front cross member weak (6.1.B.2)

underside weak

Front Suspension spring mounting prescribed area is corroded but not considered excessive x panel heavely welded (2.4.A.3)

Rear Shock absorber has slight external damage to the casing (2.7.2a)

Nearside Front Front drive shaft coupling flexible rubber or fabric coupling unit breaking up (2.5.C.1d)

Offside Rear Suspension spring mounting prescribed area is excessively corroded chassies (2.4.A.3)

Front Suspension spring mounting prescribed area is corroded but not considered excessive x panel heavely welded (2.4.A.3)

Rear Shock absorber has slight external damage to the casing (2.7.2a)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Brake pipe excessively corroded (3.6.B.2c)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front front brake binding (3.7.B.1)

both rear shock absorbers dust covers corroded

front and rear vsuspension and chassis very rusty

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front brake disc slightly pitted (3.5.1h)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front brake disc slightly pitted (3.5.1h)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

underside of vehicle very dirty

Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Front registration plate character(s) incorrectly spaced (6.3.4a)

Nearside Windscreen wiper blade deteriorated (8.2.2)

Rear registration plate character(s) incorrectly spaced (6.3.4a)