2013 Mazda Bongo Friendee

Exhaust rusty

Front Heavily wax oiled

Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Heavily wax oiled

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm 225/55r17 (5.2.3 (e)) DANGEROUS

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Radiator support very rusty

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Suspension arm corroded but not seriously weakened Trailing arm (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Exhaust silencer slightly loose Very rusty (8.1.1 (b) (i))

Rear Prop shaft joint worn, but not excessively (6.1.7 (c) (i))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Lower Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Radiator support very rusty

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Outer Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))

Offside Rear Suspension arm corroded but not seriously weakened Trailing arm (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Exhaust silencer slightly loose Very rusty (8.1.1 (b) (i))

Rear Prop shaft joint worn, but not excessively (6.1.7 (c) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Rear exhaust heat shield loose

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced x member (7.1.1 (a) (i))

Central Exhaust has a minor leak of exhaust gases box (6.1.2 (a))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

oil leak

Rear Brake pad(s) wearing thin (3.5.1g)