2006 Saab 9-3

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

long travel on park brake lever

Nearside Front Road wheel fixing loose (5.2.1 (a) (i))

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Rear Fuel system component leaking at filter (6.1.3 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

long travel on park brake lever

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Rear Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Position lamp incorrect colour (4.2.3 (a) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Position lamp incorrect colour (4.2.3 (a) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Windscreen washer not working (3.5 (a))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front cross member to radiator support corroded

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front cross member to radiator support corroded

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

engine management light on

rear axle corroded

Nearside Rear Valve stem seriously damaged (4.1.D.1e)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Valve stem seriously damaged (4.1.D.1e)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front cross member to radiator support corroded

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front cross member to radiator support corroded

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

engine management light on

rear axle corroded

Nearside Rear Upper Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Upper Suspension arm has excessive play in a pin/bush (2.4.G.2)

EML illuminated indicating a fault

front lower suspension subframe corroded but not deemed excessive

n/s/r suspension trailing arm mount corroded but not deemed excessive

os/r trailing arm mount corroded but not deemed excessive

rear suspension subframe corroded but not deemed excessive

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front coil spring broken (2.4.C.1a)

Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

EML illuminated indicating a fault

front lower suspension subframe corroded but not deemed excessive

n/s/r suspension trailing arm mount corroded but not deemed excessive

os/r trailing arm mount corroded but not deemed excessive

rear suspension subframe corroded but not deemed excessive

Parking brake lever has little reserve travel (3.1.6b)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Parking brake lever has little reserve travel (3.1.6b)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

E/M/L on

Suspension arm has slight play in a pin/bearing (2.4.G.2)

Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

E/M/L on

Suspension arm has slight play in a pin/bearing (2.4.G.2)

Tyre worn close to the legal limit (4.1.E.1)

O/S/R tyre going out of shape

Suspension arm has slight play in a pin/bearing (2.4.G.2)

Tyre worn close to the legal limit (4.1.E.1)

brake discs rusty

Offside Front Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)