2006 Suzuki Swift

Oil leak, but not excessive engine (8.4.1 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Rear axle mounting points (6.2.2 (d) (i))

Anti-lock braking system warning lamp does not illuminate (1.6 (a))

Engine MIL inoperative or indicates a malfunction Inoperative (8.2.1.2 (h))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material corroded (1.1.11 (c))

Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security Rear axle mounting points (6.2.2 (d) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Subframe mounting prescribed area is corroded but not considered excessive both side (5.3.6 (a) (i))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Coolant leak radiator ()

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Service brake excessively binding (1.2.1 (f))

Coolant leak radiator ()

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

engine light on/emissions met

sill covers fitted covering testable items

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Exhaust system not adequately supported (7.1.1)

Nearside Rear Brake pipe slightly corroded SUGGEST REPLACE (3.6.B.2c)

engine light on/emissions met

Nearside Front Inner Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Inner Suspension arm has slight play in a pin/bush (2.4.G.2)

Rear exhaust supports weak

sill covers fitted

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear rear brake binding (3.7.B.1)

Nearside Front Inner Suspension arm has slight play in a pin/bush (2.4.G.2)

Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Inner Suspension arm has slight play in a pin/bush (2.4.G.2)

Rear exhaust supports weak

sill covers fitted

Nearside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Inner Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Brake pipe slightly corroded (3.6.B.2c)

rear exhaust supports weak

sill covers fitted

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Headlamp aim too low and too far to the right. (1.8)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp aim too low and too far to the right. (1.8)

nail in nearside rear tyre

rear exhaust section has 2 of the 3 mounting brackets broken, is still adequatly supported

All exhaust clamps and brackets corroded.

Items removed from driver's view prior to test

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Brake pipe slightly corroded (3.6.B.2c)

Under-trays fitted obscuring some underside components

Items removed from driver's view prior to test

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

front brake pads worn close to legal minimum of 1.5mm

imbalance of 44% between rear brakes

nearside front lower suspension arm,rear mounting bush,rubber bonding deteriorated

rear brake flexable hoses,metal ferrules corroded

rear silencer support mounting adrift from silencer

Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Items removed from driver's view prior to test

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

front brake pads worn close to legal minimum of 1.5mm

imbalance of 44% between rear brakes

nearside front lower suspension arm,rear mounting bush,rubber bonding deteriorated

rear brake flexable hoses,metal ferrules corroded

rear silencer support mounting adrift from silencer

both rear brake flexable hoses,metal ferrules corroded

cut in nearside rear tyre sidewall

nearside and offside front lower suspension arm rear mounting bushes,rubber bonding deteriorated

offside front lower suspension arm rear mounting bush,rubber bonding deteriorated

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

nail in nearside rear tyre

nearside front tyre on legal minimum of 1.6mm

offside front tyre worn down to 2mm