2001 Suzuki Swift

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Exhaust system insecure mounting area corroded (6.1.2 (a))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced gearbox mount area, inner wheel arch (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material all covered in underseal (1.1.11 (c))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Side repeater not working (4.4.1 (a) (ii))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Subframe area (6.2.2 (d) (i))

Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))

Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

rear suspension components corroded

Fuel Pipe/s corroded ()

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension arm corroded but not seriously weakened all rear (2.4.G.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Exhaust has a minor leak of exhaust gases (7.1.2)

Fuel Pipe/s corroded ()

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Suspension arm corroded but not seriously weakened all rear (2.4.G.1)

coil spring corroded both rear coils (2.4.C.1b)

various areas of corrosion to the underside inc 'near rear suspension upper mounts

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear coil spring corroded (2.4.C.1b)

rear exhaust corroded

rear suspension corroded

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear coil spring corroded (2.4.C.1b)

rear exhaust corroded

rear suspension corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Tyre worn close to the legal limit (4.1.E.1)

surface corrosion near rear suspension arm mounts

Nearside Front brake disc excessively pitted (3.5.1h)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

rear tyres "cracking "