2002 Mercedes-benz Vito

Nearside Outer Vehicle structure has slight corrosion Sill area (6.1.B.2)

windscreen has a crack not obscuring drivers view offside lower

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

windscreen has a crack not obscuring drivers view offside lower

Exhaust heat shield loose

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Underside of vehicle has been undersealed

Centre Seat belt retracting mechanism defective (5.2.5b)

Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Direction indicator not working (1.4.A.2c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brake hose slightly deteriorated (3.6.B.4d)

Brake pipe slightly corroded (3.6.B.2c)

Oil leak

Vehicle structure has slight corrosion (6.1.A.1)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Driver's door cannot be opened from inside the vehicle (6.2.B.1b)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Side repeater incorrect colour (1.4.A.2f)

Nearside Stop lamp not working (1.2.1b)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

rear wiper blade not efficient

Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Side repeater slightly discoloured (1.4.A.2f)

Rear Brake load sensing valve stiff (3.6.E.3)

Offside Stop lamp not working (1.2.1b)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Offside Side repeater slightly discoloured (1.4.A.2f)

Rear Brake load sensing valve stiff (3.6.E.3)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Brake hose leaking (3.6.A.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Headlamp aim too low (1.8)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear position lamp(s) incorrect colour (1.1.A.3e)

Offside rear brake recording little or no effort (3.7.B.5a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Horn not working (1.6.2a)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Offside Side repeater incorrect colour (1.4.A.2f)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Headlamp masks/converters fitted

n/s/f head lamp broken but ok at time of test

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Registration plate lamp not working (1.1.C.1d)