2003 Mercedes-benz Vito

Brake pedal anti-slip provision missing (1.1.2 (c))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Body panel corroded and likely to cause injury sharp edge caused by corrosion (6.2.1 (a) (i))

Offside Front Bumper insecure (6.1.4 (a) (i))

Offside Front Driver's door catch insecure broken (6.2.3 (c) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inside bonnet (6.1.1 (c) (i))

Offside Rear Body panel corroded and likely to cause injury sharp edge caused by corrosion (6.2.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever missing (1.1.6 (d))

Rear Direction indicator incorrect colour both side (4.4.3 (a))

Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member near tow hock (6.1.1 (c) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Headlamp has a product on the lens but not seriously reducing light output bot side faded (4.1.4 (b))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive suspension arm mount (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive coil spring cup (5.3.6 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings central (6.1.B.2)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings central (6.1.B.2)

Parking brake: efficiency below requirements (3.7.B.7)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Front Anti-roll bar has excessive play in a ball joint both sides (2.4.G.2)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

rear cross member corroded

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear coil spring broken (2.4.C.1a)

Offside Front Brake hose stretched (found during steering lock to lock check) (2.2.D.2b)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear coil spring broken (2.4.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

both os and ns iner and outer sills corroding

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

both os and ns iner and outer sills corroding

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

brake warning light on

1.corrosion on jacking points.

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear coil spring corroded (2.4.C.1b)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear coil spring worn (2.4.C.1b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

nearside front tyre worn outer edge

offside front tyre worn outer edge

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

offside rear tyre wearing inner edge