2005 Mazda Bongo

Front Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced both sill panels inner and outer (6.1.1 (c) (i))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Suspension arm corroded but not seriously weakened lower (5.3.3 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material main (1.1.11 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Side repeater not working (4.4.1 (a) (ii))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Rear Upper Stop lamp(s) with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii))

Rear fog lamp not working (4.5.1 (a) (ii))

Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive shock top mout (5.3.6 (a) (i))

Nearside Windscreen damaged but not adversely affecting driver's view lower (3.2 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Central Seat belt missing row of seats buckles missing (7.1.2 (a))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Windscreen washer not working (3.5 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust mounting defective (6.1.2 (a))

Headlamp lens slightly defective Both (4.1.1 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced Both rear wheel arches. (6.1.1 (c) (i))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Side repeater lens defective which has no effect on emitted light Both (4.4.1 (b) (i))

Spare tyre defective ()

Tyre slightly damaged/cracking or perishing Both rear (5.2.3 (d) (ii))

Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Rear Brake pad(s) wearing thin (3.5.1g)

Headlamps detetriorated & the O/S lamp is cracked

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

both sills covered with trim unable to examine