2006 Mitsubishi Lancer

Suspension component corroded but not seriously weakened multiple suspension components corroded (5.3.3 (b) (i))

Suspension component corroded but not seriously weakened multiple suspension components corroded (5.3.3 (b) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e))

Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced Sill re welded and under sealed (6.1.1 (c) (i))

Offside Steering linkage ball joint has slight play (2.1.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Under body and multiple suspension components corroded but not seriously effecting its strength (6.1.1 (c) (i))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis corroded causing a sharp edge and projection (6.1.1 (c) (i))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Steering linkage ball joint has slight play (2.1.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Under body and multiple suspension components corroded but not seriously effecting its strength (6.1.1 (c) (i))

Nearside Rear Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Under body and multiple suspension components are corroded but not seriously effecting its strength (6.1.1 (c) (i))

Inner Tyre slightly damaged/cracking or perishing Both front (5.2.3 (d) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced Under body and multiple suspension components corroded but not seriously effecting its strength causing a sharp edge or projection (6.1.1 (c) (i))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Steering linkage ball joint has slight play (2.1.3 (b) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Under body and multiple suspension components slightly corroded but not seriously affecting its strength or causing a sharp edge/ projection (6.1.1 (c) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Play in steering rack inner joint(s) ()

both rear tyres slightly perished

Offside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside front brake binding (3.7.B.1)

Play in steering rack inner joint(s) ()

Front Vehicle structure has excessive corrosion which adversely affects braking or steering crossmember (6.1.A.1)

Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Rear Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Play in steering rack inner joint(s) ()

Front Vehicle structure has slight corrosion cross member (6.1.A.1)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Front Vehicle structure has slight corrosion (6.1.A.1)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

exhaust joints & flexi rusty

engine man light on dash

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Side repeater insecure (1.4.A.2b)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

plastic sill covers fitted

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

plastic sill covers fitted

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Anti-roll bar linkage insecure (2.4.G.1)

Offside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Parking brake lever has no reserve travel (3.1.6b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

nearside and offside wipers starting to split

tyre size 195/50r16 84v