2008 Yamaha Ybr 125 Custom

Front Brake lever pivots slightly worn (3.1.3a)

Front shock absorber has light misting of stanchion l/h and r/h. (2.3.3)

Motorcycle structure slightly corroded Rear frame tubes. (6.1.1a)

Number plate slightly cracked.

Rear Exhaust mounting deteriorated. (7.1.1.c)

Clutch lever shortened. Pivot area damaged. (6.2.1g)

Front brake hose insecure.

Horn not working (1.7.3a)

Clutch lever shortened. Pivot area damaged. (6.2.1g)

Drive chain excessively loose (6.2.1d)

Footrest insecure Bolt missing. (6.2.1a)

Front brake hose insecure.

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension assembly slightly corroded. Fork tubes. (2.3.1)

Rear Tyre worn close to the legal limit (4.1.3(i))

Throttle cable damaged.

Brake reaction bracket securing bolt(s) loose Retaining clip missing. (3.2.A1j)

Rear Brake lining(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Footrest missing (6.2.1a)

Rear suspension bush has excessive free play Swingarm. (2.4.A2a(i))

Rear suspension component excessively corroded. Swingarm brace. (2.4.A.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front suspension assembly slightly corroded. Fork tubes. (2.3.1)

Rear Tyre worn close to the legal limit (4.1.3(i))

Throttle cable damaged.

Drive chain sprocket carrier worn but not considered excessive (6.2.1e)

Drive chain sprocket slightly worn (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Motorcycle structure slightly corroded (6.1.1a)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear suspension bush has slight free play (2.4.A2a(i))

Drive chain slightly loose (6.2.1d)

Front shock absorber has light misting of stanchion (2.3.3)

Drive chain slightly loose (6.2.1d)

Front shock absorber has light misting of stanchion (2.3.3)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Cush drive rubbers have slight play

Drive chain worn but not considered excessive (6.2.1e)

Exhaust heat shield mounting deteriorated

Exhaust slightly deteriorated (7.1.1a)

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front suspension assembly slightly corroded. (2.3.1)

Handlebars very slightly bent

Rear Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Front Motorcycle structure slightly distorted (6.1.1a)

Rear Drive chain sprocket carrier worn but not considered excessive (6.2.1e)