2009 Honda CBF125

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Tyre worn close to the legal limit (5.2.3 (e))

Steering headbearing has slight free play (2.2.2 (f) (i))

Brake fluid below minimum mark (1.1.10 (d) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

front brake binding slightly

headrace bearings notchy

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Handlebar deformed (2.1.1b)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Steering movement excessively stiff with the weight on the lower bearing (2.2.1a)

Stop lamp does not illuminate immediately a brake applies Front (1.3.1a)

Tyre has a tear caused by separation or partial failure of its structure Front (4.1.2a(ii))

Roller brake test indicates a binding brake Rear (3.3.A1a) DANGEROUS

Brake lever is bent but brake can still be readily applied Front (3.1.3c)

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Motorcycle structure slightly corroded All over (6.1.1a)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Tyre worn close to the legal limit (4.1.3(ii))

Horn not working (1.7.3a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Drive chain worn to excess (6.2.1e)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))