2014 Qingqi Qm

Brake caliper slightly damaged but function not impaired (1.1.16 (a) (i))

Chain guard missing ()

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Suspension arm ball joint worn, but not excessively Rear shock bottom mount (5.3.4 (a) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Rear Shock absorber has a serious fluid leak (5.3.2 (b))

Rear reflector missing (4.8.2 (a) (ii))

Throttle operating incorrectly (6.2.7 (a) (i))

Rear Brake disc fractured (1.1.14 (a) (ii)) DANGEROUS

Rear Tyre tread not clearly visible (5.2.3 (e)) DANGEROUS

Brake caliper slightly damaged but function not impaired (1.1.16 (a) (i))

Chain guard missing ()

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Suspension arm ball joint worn, but not excessively Rear shock bottom mount (5.3.4 (a) (i))

Rear Upper Shock absorber has a slightly worn bush (5.3.2 (c))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Horn not working (7.7 (a) (ii))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Registration plate incorrect (0.1 (c))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) DANGEROUS

Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Stop lamp not working (4.3.1 (a) (ii))

Horn not working (7.7 (a) (ii))

Rear Position lamp not working (4.2.1 (a))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Chain guard missing ()

mirrors missing at time of test

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

Direction indicators flashing less than 60 times a minute (1.5.1c)

Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort (3.3.A1c)

Headlamp aim too low (1.6)

Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear wheel bearings have excessive free play (2.4.A.2c)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Steering movement excessively stiff with the wheel raised (2.2.1b)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))