2004 Jaguar X-type

Bonnet cannot be secured in the closed position (3.1 (b) (i))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Direction indicator incorrect colour (4.4.3 (a))

Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords outer wall (5.2.3 (d) (i))

Nearside Front Tyre worn close to legal limit/worn on edge edges (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords outer wall (5.2.3 (d) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords outer wall (5.2.3 (d) (i))

Nearside Front Tyre worn close to legal limit/worn on edge edges (5.2.3 (e))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Tyre worn close to legal limit/worn on edge edge (5.2.3 (e))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords outer side wall (5.2.3 (d) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Rear Direction indicator slightly discoloured both (4.4.3 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Front Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords outer side wall (5.2.3 (d) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Rear Direction indicator slightly discoloured both (4.4.3 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Tyre worn close to the legal limit (4.1.E.1)

advise rear inner and outer sills rusty

front brake fluctuating, but not excessively (3.7.B.3)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Oil leak ()

Towball/hitch not fitted at time of test ()

front brake fluctuating, but not excessively (3.7.B.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded Inner sill (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded Outer sill behind body kit. (2.4.A.3)

Offside Rear Subframe mounting prescribed area is excessively corroded Inner sill (2.4.A.3)

Offside Rear Subframe mounting prescribed area is inadequately repaired Outer sill repair plate not fully seam wielded. (2.4.A.3)

Offside rear brake binding (3.7.B.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Oil leak ()

Towball/hitch not fitted at time of test ()

front brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Wheel nut(s) missing (4.2.A.1e)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

o/s/r tyre wearing on inner edge

Parking brake lever, pawl mechanism pivots or their associated mountings are insecure (3.1.4b)

o/s/r tyre wearing on inner edge

front brake application uneven (3.7.B.2)

Rear Brake pad(s) wearing thin (3.5.1g)

o/s front tyre wearing on inner edge

Front brake disc excessively pitted (3.5.1h)