MOT Status
ExpiredMileage
61,384 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm front bush (5.3.4 (a) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive floor (7.1.1 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front front brake binding (3.7.B.1)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Anti-roll bar attachment bracket/mounting corroded but its strength is not seriously reduced (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Tyre worn close to the legal limit inner wear and slight cracking (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside front brake binding (3.7.B.1)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Tyre worn close to the legal limit inner wear and slight cracking (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Tyre worn close to the legal limit inner wear and slight cracking [advise change shortly] (4.1.E.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
o/s/f brake binding slightly
o/s/f brake operation slightly slower than n/s/f
slight corrosion of front chassis
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
o/s/f brake binding slightly
o/s/f brake operation slightly slower than n/s/f
slight corrosion of front chassis
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the MG ZS?
Based on 361,123 MOT tests across 38,682 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WL04 NEY is a 2004 MG ZS in Grey with a 1,796cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 64.7%.
Across all 2004 MG ZS models, the average MOT pass rate is 71.1% with a typical mileage of 58,386 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a MG ZS fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 14,838 recorded failures. If you're considering buying WL04 NEY, it's worth having these areas checked by a mechanic before committing.
The MG ZS typically stays on UK roads for around 25 years. At 22 years old, this MG ZS is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WL04 NEY?
You can check the full history of WL04 NEY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WL04 NEY registered?
WL04 NEY is a 2004 MG ZS, first registered on 30 June 2004.
Is WL04 NEY safe to buy?
The MOT history for WL04 NEY shows 17 tests with a 64.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WL04 NEY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WL04 NEY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.