2004 Ford Ranger

Central Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Central Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength spring hanger (5.3.6 (a) (i))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Road wheel fixing missing (5.2.1 (a) (i))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Road wheel fixing missing (5.2.1 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Road wheel more than one fixing missing (5.2.1 (a) (ii)) DANGEROUS

Nearside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Power steering component has slight seepage from a component (2.1.5 (a))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced rear chassis corrosion (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material all front and rear (1.1.11 (c))

Nearside Front Suspension component corroded but not seriously weakened outrigger (5.3.3 (b) (i))

Nearside Rear Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))

Offside Front Suspension component corroded but not seriously weakened outrigger (5.3.3 (b) (i))

Offside Rear Nail in tyre

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering component has slight seepage from a component (2.1.5 (a))

Nearside Front Brake pipe corroded, covered in grease or other material pitted. (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material pitted (1.1.11 (c))

Offside Front Brake pipe corroded, covered in grease or other material pitted (1.1.11 (c))

extensive welding repairs carried out to chassis, weekend.

Brake load sensing valve seized (3.6.E.3)

Central Upper Stop lamp not working high view stop lamp. (1.2.1b)

Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outriger. (6.1.B.2)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear anchorage chassis area. (2.4.A.3)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front crossmember body area. (6.1.B.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded shock anchorage area. (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded rear anchorage center cross member area. (2.4.A.3)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded feed to wheel cylinder. (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

chassis corroded and weekend trough out o/s and n/s.

Vehicle structure has slight corrosion vehicle under side (6.1.B.2)

Front Suspension component mounting prescribed area is excessively corroded cross member (2.4.A.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Rear fog lamp not working (1.3.2b)

Vehicle structure has slight corrosion vehicle under side (6.1.B.2)

Front Vehicle structure has slight corrosion cross member (6.1.B.2)

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)

Oil leak

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high and too far to the right. (1.8)

Oil leak

Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Both chassis rails from centre to rear of vehicle have heavy surface corrosion

Both rear shock absorber upper covers/casings are corroded

Offside front shock absorber upper cover/casing corroded

Spare wheel carrier crossmember is excessiely corroded at chassis attachment area

Brake pipe excessively corroded (3.6.B.2c)

Front registration plate deteriorated (6.3.1d)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear fog lamp emits a light other than red (1.3.2e)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Both chassis rails from centre to rear of vehicle have heavy surface corrosion

Both rear shock absorber upper covers/casings are corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside front shock absorber upper cover/casing corroded

Rear Brake pipe slightly corroded (3.6.B.2c)

Spare wheel carrier crossmember is excessiely corroded at chassis attachment area

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front Upper Shock absorber has slight corrosion to the casing (2.7.2a)

Shock absorber has slight corrosion to the casing (2.7.2a)

both front tyres are worn thin on outer edges

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c) DANGEROUS

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front Upper Shock absorber has slight corrosion to the casing (2.7.2a)

Shock absorber has slight corrosion to the casing (2.7.2a)

both front tyres are worn thin on outer edges

front crossmember slightly corroded

centre exhaust bracket deteriorated

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Centre Exhaust mounting missing (7.1.1b)