2006 Peugeot 107

Nearside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area is inadequately repaired inner sill (7.1.1 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is inadequately repaired inner sill (7.1.1 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

all rear underside heavily corroded

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front (5.3.4 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Coil spring corroded Both front (5.3.1 (b) (i))

Front Service brake fluctuating, but not excessively Both front (1.2.1 (e))

Front Tyre worn close to legal limit/worn on edge Front tyres wearing on inner edges (5.2.3 (e))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner rear bush (5.3.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner rear bush (5.3.4 (a) (i))

Rear Coil spring corroded Both rear (5.3.1 (b) (i))

Emissions unable to be completed Due to major exhaust leak (8.2.1.2 (d))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases Rear silencer (6.1.2 (a))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front (5.3.4 (a) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Coil spring corroded Both front (5.3.1 (b) (i))

Front Service brake fluctuating, but not excessively Both front (1.2.1 (e))

Front Tyre worn close to legal limit/worn on edge Front tyres wearing on inner edges (5.2.3 (e))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner rear bush (5.3.4 (a) (i))

Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Inner rear bush (5.3.4 (a) (i))

Rear Coil spring corroded Both rear (5.3.1 (b) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases Silencer (6.1.2 (a))

Emissions not tested Exhaust manifold leaking (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases Exhaust manifold (6.1.2 (a))

Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded & holed (7.1.1 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Trailing arm mounting corroded & holed (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Headlamp insecure (4.1.1 (c))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Sill corroded & holed (7.1.1 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement Rear bush (5.3.4 (a) (i))

Rear Coil spring corroded both (5.3.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases Silencer (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Horn not working (7.7 (a) (ii))

Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Rear Suspension component corroded but not seriously weakened axle (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive rear of vehicle has surface corrosion. (5.3.6 (a) (i))

rear axle has surface corrosion.

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Suspension component mounting prescribed area is corroded but not considered excessive rear of vehicle has surface corrosion. (5.3.6 (a) (i))

rear axle has surface corrosion.

Centre & rear exhaust corroded

EML Light on

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside rear tyre perished

Signs of coolant leak from radiator

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Headlamp not working on dipped beam (1.7.5a)

Centre & rear exhaust corroded

EML Light on

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside rear tyre perished

Signs of coolant leak from radiator

Engine light on

Front brake disc worn

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Engine light on

Front brake disc worn

Headlamp aim too low (1.8)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Headlamp not working on dipped beam (1.7.5a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

slight smear on front wipers

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Rear Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)