2006 Mazda MX-5

underbody corrosion present around all rear suspension

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Suspension ball joint gaitors starting to crack and perish

Nearside Rear Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Rear Upper Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Upper Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Rear Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Tyre slightly damaged/cracking or perishing both rear tyres (5.2.3 (d) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced sub frame and mountings corroded (6.1.1 (c) (i))

both rear anti roll bar link pin ball joint boots split however not yet allowing the ingress of dirt replace as soon as possible.

steering and suspension ball joint boots perishing

Front Brake disc worn, pitted or scored, but not seriously weakened corroded on inner faces (1.1.14 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

underbody corrosion present

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

underbody corrosion starting advise underbody protection

sill covers fitted.

underbody corrosion present

Offside Front brake caliper leaking on flexy hose banjo bolt area. (3.6.A.1)

sill covers fitted.

underbody corrosion present

Front tyres cracked on sidewall

Rear Brake pad(s) wearing thin (3.5.1g)

n/s/f tyre splitting inner wall

o/ds/f tyre splitting outer wall

Rear Brake pad(s) wearing thin (3.5.1g)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Rear tyres tread getting low

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Windscreen wiper blade insecure (8.2.2)

Front Brake pad(s) wearing thin (3.5.1g)