MOT Status
ExpiredMileage
167,071 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Emissions unable to be completed due to exhust pipe condition /blowing (8.2.1.2 (d))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
l/h/f and l/h/r tyres under inflated
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Emissions unable to be completed excessive blowing on system (8.2.1.2 (d))
Front Registration plate does not conform to the specified requirements (0.1 (d))
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Headlamp aim too low (4.1.2 (a))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Rear Parking brake inoperative on one side very low effort recorded (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Central Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Trailing arm & subframe mounts (5.3.6 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Trailing arm & subframe mounts (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened All arms (5.3.3 (b) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Central Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Trailing arm & subframe mounts (5.3.6 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Trailing arm & subframe mounts (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened All arms (5.3.3 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bushes (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bushes (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Heat shield loose
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords 215-50-17 (5.2.3 (d) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bushes (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing Also damage to outer rim of tyre (5.2.3 (d) (ii))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bushes (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Heat shield loose
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Windscreen wiper blade missing (3.4 (b) (ii))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear tyres stepped on inner edges
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Registration plate lamp not working (1.1.C.1d)
rear tyres starting to step inner edge
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WL08 FRC is a 2008 Mazda 6 in Silver with a 1,998cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2008 Mazda 6 models, the average MOT pass rate is 71.4% with a typical mileage of 87,272 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying WL08 FRC, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 18 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of WL08 FRC?
You can check the full history of WL08 FRC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WL08 FRC registered?
WL08 FRC is a 2008 Mazda 6, first registered on 29 May 2008.
Is WL08 FRC safe to buy?
The MOT history for WL08 FRC shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WL08 FRC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WL08 FRC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.