MOT Status
ExpiredMileage
108,485 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Rear silencer/baffles loose
Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))
Rear silencer/baffles loose
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Nearside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Offside Rear Upper Shock absorbers has an excessively worn bush (5.3.2 (c))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Shock absorber has a slightly worn bush (2.7.4)
Nearside rear brake application uneven (3.7.B.2)
Nearside rear parking (secondary) brakes imbalanced (3.7.B.6b)
Offside Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Shock absorber has a slightly worn bush (2.7.4)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Fuel cap/sealing device mounting flange/sealing method defective (7.2.4c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim too high and too far to the right. (1.8)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Fiat Panda?
Based on 1,821,354 MOT tests across 128,867 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WL08 KCY is a 2008 Fiat Panda in Silver with a 1,242cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 2008 Fiat Panda models, the average MOT pass rate is 72.8% with a typical mileage of 50,567 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Panda fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 66,636 recorded failures. If you're considering buying WL08 KCY, it's worth having these areas checked by a mechanic before committing.
The Fiat Panda typically stays on UK roads for around 22 years. At 18 years old, this Fiat Panda is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WL08 KCY?
You can check the full history of WL08 KCY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WL08 KCY registered?
WL08 KCY is a 2008 Fiat Panda, first registered on 30 June 2008.
Is WL08 KCY safe to buy?
The MOT history for WL08 KCY shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WL08 KCY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WL08 KCY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.