2011 Hyundai Iload

Central exhaust joint corroded and at risk of failing

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Central exhaust joint corroded and at risk of failing

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Central Front Exhaust has a major leak of exhaust gases flexi joint broken (6.1.2 (a))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Items removed from driver's view prior to test ()

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Central Rear Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))

Front Lower Power steering component has slight seepage from a component Steering rack has slight fluid leak from inner gaitors (2.1.5 (a))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Central Prop shaft bearing has slight play (6.1.7 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Brake cable damaged (1.1.15 (a))

Central Prop shaft bearing has slight play (6.1.7 (b) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Central Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Central Prop shaft flexible coupling slightly deteriorated (6.1.7 (d) (i))

Nearside Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front seat belt slightly poor condition

damage on screen ,but less than 10mm dia

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front seat belt slightly poor condition

damage on screen ,but less than 10mm dia

Central Rear Prop shaft bearing perished

Chip in zone A of windscreen not bigger than 10mm

Front and rear brake pads unable to asess in full

Nearside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Headlamp lens slightly defective Not affecting beam image (4.1.1 (b) (i))

Offside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Central Rear Prop shaft bearing perished

Chip in zone A of windscreen not bigger than 10mm

Front and rear brake pads unable to asess in full

Nearside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Headlamp lens slightly defective Not affecting beam image (4.1.1 (b) (i))

Offside Front Upper Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Registration plate lamp not working (1.1.C.1d)

front brake pads getting low

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Parking brake lever has no reserve travel (3.1.6b)

rear brake application uneven (3.7.B.2)