2015 Ksr Moto Tw

Chain guard missing ()

Front brake lever shortened but can be applied satisfacorily.

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Motorcycle structure joining/attachment plate or fastening insecure Securing pin missing from rear wheel spindle. (6.1.1 (b) (i))

Nearside Front Shock absorber has a serious fluid leak Bolt missing from bottom of fork leg where guard should be secured and leaking oil. (5.3.2 (b))

Nearside Front Suspension component mounting has an unsafe modification Lower guard mounting missing and fouling upper fork leg. (5.3.3 (c) (i))

Rear reflector missing (4.8.2 (a) (ii))

Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Chain guard missing ()

Front brake lever shortened but can be applied satisfacorily.

Registration plate slightly loose (0.1 (a))

Drive chain sprocket excessively loose (6.1.7 (c) (i))

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Position lamp not working (4.2.1 (a))

Front Shock absorber has negligible damping effect both forks (5.3.2 (b))

Nearside Front Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))

Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear Brake component insecure caliper bracket loose (1.1.21 (c))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Rear Stop lamp switch with a delay in operation not working (4.3.2 (a) (ii))

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Offside Front Shock absorber has a light misting of oil fork (5.3.2 (b))

Rear wheel spindle bolt retaining locking device missing (split pin)

Decelerometer brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake component insecure brake pad pin beaten into hole? (1.1.21 (c))

Front Position lamp not working (4.2.1 (a))

Front Stop lamp not working intermittent as lever pulled (4.3.1 (a) (ii))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear Shock absorber has a serious fluid leak (5.3.2 (b))

Rear reflector missing (4.8.2 (a) (ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Wheel fixing loose (single fixing) rear brake plate moves, so think the spindle is loose. (5.2.1 (a) (ii)) DANGEROUS

Chain guard missing ()

Offside Front Suspension corroded but not seriously weakened chrome rusted, will tear oil seal (5.3.3 (b) (i))

Wheel alignment slightly misaligned rear wheel off line (2.4 (a))

chain tight

middle front brake hose guide rusted off

rear brake hose guide detached

tank shrouds have bolts missing