2001 Mitsubishi Shogun

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Service brake excessively binding (1.2.1 (f))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Brake hydraulic reservoir fluid level significantly below minimum level (1.1.10 (d) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Lower Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Brake pipe leaking on a hydraulic braking system Rigid Pipe, at union with flexi-hose (1.1.11 (b) (ii)) DANGEROUS

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front to rear brake pipes corroded

Nearside Rear brake caliper damp

Oil leak ()

corrosion to under vehicle

engine light on

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Rear Exhaust system not adequately supported (7.1.1)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Front to rear brake pipes corroded

Nearside Rear brake caliper damp

Oil leak ()

corrosion to under vehicle

engine light on

Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Nearside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Parking brake lever has little reserve travel (3.1.6b)

both front inner wheel arches corroded

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Steering rack gaiter split (2.2.D.2d)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

both front inner wheel arches corroded

Offside Front Steering rack gaiter split (2.2.D.2d)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front front brakes release unevenly (3.7.B.4)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside front brake binding (3.7.B.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Front front brake grabbing slightly (3.7.A.2b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

rear most seats missing & belts imcomplete

slight corrosion under brake servo area

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)