MOT Status
ExpiredMileage
176,334 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Wheel bearing has slight play (5.1.3 (a) (i))
Rear Rear fog lamp slightly affected by the operation of another lamp (4.5.4 (b))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
underbody and chassis heavily corroded
Front Registration plate does not conform to the specified requirements (0.1 (d))
Front Registration plate insecure (0.1 (a))
Nearside Front Outer Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Outer Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Offside Headlamp aim too high (4.1.2 (a))
Windscreen washer not working (3.5 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
underbody and chassis heavily corroded
Nearside Front Outer Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Outer Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii))
Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure inner wall (5.2.3 (d) (ii)) DANGEROUS
chassis and underbody corroded
play in osf steering idler and draglink end
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear fog lamp not working (1.3.2b)
rear brake application uneven (3.7.B.2)
chassis and underbody corroded
play in osf steering idler and draglink end
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
underbody and chassis heavily corroded throughout cannot find any holes
Nearside Headlamp aim too low (1.8)
Offside Front Outer Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Outer Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front front brake binding (3.7.B.1)
Offside Headlamp aim too high (1.8)
Rear fog lamp not working (1.3.2b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
underbody and chassis heavily corroded throughout cannot find any holes
Fuel pipes corroded
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear fog lamp not working (1.3.2b)
Fuel pipes corroded
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Body has slight corrosion to chassis mounting areas.
Front suspension arms and components corroded.
Fuel pipe/s corroded
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Shock absorber has slight corrosion to the casing (2.7.2a)
Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
gearbox has an idle noise
Engine smokey at first on test.
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front wheel bearing has slight play (2.5.A.3c)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
engine smokey at first!!
renewal of cambelt!!
Offside Headlamp aim too low (1.8)
Offside Rear fog lamp not working (1.3.2b)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Brake pad(s) wearing thin (3.5.1g)
engine smokey at first!!
renewal of cambelt!!
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Nearside Outer Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Outer Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Rear Rear fog lamp not working (1.3.2b)
Inner Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mitsubishi L200 Double Cab?
Based on 774,794 MOT tests across 49,827 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WL55 LNR is a 2005 Mitsubishi L200 Double Cab in Black with a 2,477cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2005 Mitsubishi L200 Double Cab models, the average MOT pass rate is 71.2% with a typical mileage of 86,553 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi L200 Double Cab fails its MOT is brake pipe excessively corroded, accounting for 41,357 recorded failures. If you're considering buying WL55 LNR, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi L200 Double Cab typically stays on UK roads for around 27 years. At 21 years old, this Mitsubishi L200 Double Cab is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of WL55 LNR?
You can check the full history of WL55 LNR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WL55 LNR registered?
WL55 LNR is a 2005 Mitsubishi L200 Double Cab, first registered on 27 September 2005.
Is WL55 LNR safe to buy?
The MOT history for WL55 LNR shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WL55 LNR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WL55 LNR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.