MOT Status
ValidMileage
189,713 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sides (6.2.2 (d) (i))
Rear bumper slight damage
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both sides (6.2.2 (d) (i))
Rear bumper slight damage
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Anti-roll bar ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear axle (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play both (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear axle (5.3.4 (a) (i))
Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play both (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt BOTH O/S N/S (5.3.4 (b) (ii))
Front Position lamp not working Both (4.2.1 (a) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Front Tyre worn close to legal limit/worn on edge Both n/s 2m o/s 3m 195.65.15 (5.2.3 (e))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))
Offside Windscreen washer provides insufficient washer liquid (3.5 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Both nearside and offside (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))
Rear Both rear tyres heavily perishing
Vehicle has corrosion to various parts and places
Both rear tyres heavily perished
Suspension arm rubber bush deteriorated but not resulting in excessive movement Both rear link arms (2.4.G.2)
Suspension arm rubber bush deteriorated but not resulting in excessive movement Both wishbone rear bushes (2.4.G.2)
Trailing arm rubber bush deteriorated but not resulting in excessive movement Offside and nearside rear (2.4.G.2)
Vehicle floor covers fitted.
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a) DANGEROUS
Vehicle floor covers fitted.
Both rear tyres heavily perished
Suspension arm rubber bush deteriorated but not resulting in excessive movement Both rear link arms (2.4.G.2)
Suspension arm rubber bush deteriorated but not resulting in excessive movement Both wishbone rear bushes (2.4.G.2)
Trailing arm rubber bush deteriorated but not resulting in excessive movement Offside and nearside rear (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Centre exhaust bracket broken but system still adequetly supported
Centre stop lamp is dim
Front Lower Suspension arm has slight play in a pin/bush Both (2.4.G.2)
Front Tyre worn close to the legal limit Both (4.1.E.1)
Rear registration plate damaged
rear exhaust bracket broken but system still adequetly supported
Front Brake pad(s) wearing thin (3.5.1g)
Child seat fitted not allowing full inspection of adult belt
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
n/s/r tyre wearing on edge
Child seat fitted not allowing full inspection of adult belt
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Child seat fitted not allowing full inspection of adult belt
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
WL56 BXK is a 2006 Mazda 3 in Silver with a 1,598cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 73.9%.
Across all 2006 Mazda 3 models, the average MOT pass rate is 74.6% with a typical mileage of 70,278 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying WL56 BXK, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 20 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of WL56 BXK?
You can check the full history of WL56 BXK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was WL56 BXK registered?
WL56 BXK is a 2006 Mazda 3, first registered on 13 November 2006.
Is WL56 BXK safe to buy?
The MOT history for WL56 BXK shows 23 tests with a 73.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does WL56 BXK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on WL56 BXK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.