2009 Toyota Auris

Central Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake disc worn, but not excessively both side (1.1.14 (a) (i))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Central Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brake disc worn, but not excessively both side (1.1.14 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Parking brake lever worn, but not excessively (1.1.6 (b) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Parking brake lever worn, but not excessively (1.1.6 (b) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Brake pipe excessively corroded inner & outer (1.1.11 (c))

Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Subframe mounting prescribed area is corroded but not considered excessive both sides (5.3.6 (a) (i))

Rear exhaust flange heavily corroded

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

underside rear body corroded

Central Exhaust mounting defective (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge should replace asap (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive subframe & spring mounting area on both sides (5.3.6 (a) (i))

rear exhaust flange corroded

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Brake pipe excessively corroded front to rear (1.1.11 (c))

Central Exhaust mounting defective (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge should replace asap (5.2.3 (e))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive subframe & spring mounting area on both sides (5.3.6 (a) (i))

rear exhaust flange corroded

Exhaust mounting defective (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear axle beam becoming corroded

Rear under side sills and chassis becoming corroded

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust mounting defective (6.1.2 (a))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

exhaust becoming corroded

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

exhaust system corroded

rear axle beam becoming corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Stop lamp not working (1.2.1b)

Offside Stop lamp not working (1.2.1b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)