2010 Honda Cr-v

Nearside Rear Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords outer sidewall (5.2.3 (d) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Power steering component has slight seepage from a component rack (2.1.5 (a))

surface corrosion prescribed/none prescribed areas and suspension components

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords outer sidewall (5.2.3 (d) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Upper Position lamp with a multiple light source more than 1/2 not functioning tail light (4.2.1 (a) (ii))

Power steering component has slight seepage from a component rack (2.1.5 (a))

surface corrosion prescribed/none prescribed areas and suspension components

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

under trays fitted

Nearside Rear Upper Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp levelling device inoperative broken (4.1.5 (a))

Offside Rear Headlamp levelling device inoperative broken (4.1.5 (a))

Brake fluid close to minimum mark (1.1.10 (d) (ii))

Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Nail in tyre

Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

under trays fitted

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre slightly damaged/cracking or perishing sidewall damaged, no cords visible (5.2.3 (d) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Headlamp aim too low (4.1.2 (a))

Nearside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Service brake: efficiency below requirements (3.7.C.1a)

Tyre pressure monitoring system warning lamp indicates a fault (4.1.D.4)

Front shock absorber dust covers split

N/S/F tyre worn on outter edge

O/S/F tyre on 2.7mm and worn on outside edge

Front Windscreen washer provides insufficient washer liquid (8.2.3)

both front shock dust covers split

both front shock dust covers split

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)