2012 Peugeot Partner

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor area (6.1.1 (c) (i))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive damper mounting (5.3.6 (a) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor area (6.1.1 (c) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive damper mounting (5.3.6 (a) (i))

Oil leak, but not excessive gearbox (8.4.1 (a) (i))

Spare tyre defective ()

both rear axle mounts to body have some corrosion

rear axle beam corroded

Headlamp aim unable to be tested due to dirty lenses (4.1.2 (b))

Nearside Rear Hydraulic fluid leaking excessively (8.4.1 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor area (6.1.1 (c) (i))

Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive damper mounting (5.3.6 (a) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor area (6.1.1 (c) (i))

Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive damper mounting (5.3.6 (a) (i))

Oil leak, but not excessive gearbox (8.4.1 (a) (i))

Spare tyre defective ()

both rear axle mounts to body have some corrosion

rear axle beam corroded

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor area (6.1.1 (c) (i))

Oil leak, but not excessive gearbox area (8.4.1 (a) (i))

rear axle corroded

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Reversing lamp inoperative (4.6.1 (a))

Offside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced floor area (6.1.1 (c) (i))

Oil leak, but not excessive gearbox area (8.4.1 (a) (i))

rear axle corroded

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

rear suspension components corroded.

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Reversing lamp inoperative (4.6.1 (a))

Offside Front Road wheel fixing loose (5.2.1 (a) (i))

Offside Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Rear Service brake excessively fluctuating (1.2.1 (e))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Nearside Rear Direction indicator slightly discoloured (4.4.3 (a))

Offside Front nail in tyre

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside Rear Direction indicator slightly discoloured (4.4.3 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

rear suspension components corroded.

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Horn not working (7.7 (a))

Nearside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim not tested (4.1.2 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Headlamp aim not tested (4.1.2 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Shock absorbers has an excessively worn bush (5.3.2 (c))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Rear Suspension component pin or bush slightly worn Both rear trailing arm bushes deteriorated. (5.3.4 (a) (i))

emissions below detection level

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Stop lamp not working (1.2.1b)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Direction indicators incorrect colour (1.4.A.2f)

Nearside Rear Stop lamp not working (1.2.1b)

Offside Rear Direction indicators incorrect colour (1.4.A.2f)