2002 Mercedes-benz Vito

Front Tyre worn close to the legal limit Both (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front exhaust hanger snapped

General corrosion

Injector chuffing

Offside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both inner sills (2.4.A.3)

Rear springs different coils

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front Lower Suspension arm has excessive play in a ball joint Both (2.4.G.2)

Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Inner Front constant velocity joint is excessively worn (2.5.C.1b)

Offside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Windscreen washer provides insufficient washer liquid Both (8.2.3)

Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement Both (2.4.G.2)

Front Tyre worn close to the legal limit Both (4.1.E.1)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front exhaust hanger snapped

General corrosion

Injector chuffing

Offside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Suspension component mounting prescribed area is corroded but not considered excessive Both inner sills (2.4.A.3)

Rear springs different coils

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Front exhaust hanger snapped

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear tyre cracking

registration plate deteriorated but not likely to be misread both (6.3.1d)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement both (2.4.G.2)

Front exhaust hanger snapped

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear tyre cracking

registration plate deteriorated but not likely to be misread both (6.3.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

offside front door corroded

Tyre worn close to the legal limit (4.1.E.1)

temp repair to os door mirror

Play in steering rack inner joint(s)

mileage not displayed

nsr tyre nearing limit

Centre Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside inner driveshaft boot split

Offside rear engine mounting rubber split & insecure

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Service brake: efficiency below requirements (3.7.B.7)

o/s inner c.v boot split.

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Registration plate lamp not fitted (1.1.C.1b)

Nearside Rear coil spring fractured (2.4.C.1a) DANGEROUS

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)